American and Western soldiers have been facing the wrong end of a Kalashnikov rifle for better than half-a-century. The AK-47 is effective as a battle rifle, just as the Remington 700, Winchester Model 70, and Modern Sporting Rifle are. So, if you would take the last three hunting, why not the AK? And, if the Molot Vepr catches on, the North American cervid population may reap a similar whirlwind soldiers have, as the new AK chambers multiple calibers suitable for all big-game in the lower 48.
Molot is the Russian factory more famous for the RPK 7.62x39mm Light Machine Gun, and the company has modified this much sturdier version of the basic AK-47 into a hunting rifle chambered for more decisively lethal hunting calibers.
The Vepr operation is Kalashnikov all the way, featuring the long gas-piston operation of the AK, a similar manual of arms, but differs from the infantry AK in construction. Its parent RPK—a squad automatic weapon—was designed for the sustained high-volume fire of a light machine gun. Based on the RPK, The Vepr receiver is made from thicker 1.5mm steel rather than the 1.0mm standard for a stamped-receiver AK. The barrel is heavier, too—about twice as thick as the average AK—allowing Molot to expand the platform to handle more powerful cartridges such as the .243 Win., 6.5 Grendel, .308 Win., .30-06 SPRG, and 7.62x54R in addition to the standard 7.62×39, .223 Rem. and 5.45.
Historically, barrels in the 7.62x54R have been found with a wide variety of groove diameters, with the standard being .0311 inch. The Vepr comes with a hammer-forged, chrome-lined 4-groove, 0.311-inch barrel (discovered by slugging the barrel with a Speer lead roundball). After tapping the ball into the barrel, it pushed easily through the bore, with only the slightest amount of tightness around the gas block. Vepr states the barrel has a 1:9.4-inch twist (which is the current specification for the Dragunov SVD), so it is fast enough for the heavier hunting bullets available in this caliber. The Vepr functioned flawlessly in shooting. All five loads fed easily and ejected briskly.
Our sample was chambered in the 7.62x54R—the longest serving military cartridge in the world, having been in continuous service since 1891. Today, it still serves in the infantry role in the Dragunov, as well as in heavy machine guns. It seemed an appropriate caliber for a Russian hunting rifle, and the .30’s in this class are certainly useful hunting cartridges. There are hunting loads available, and though most come from offshore, domestic challengers led by Hornady and distributor Graf & Sons are making inroads.
Speaking of hunting, operation of the Vepr action isn’t as noisy as some, but the proper way to load the rifle is to pull back the reciprocating bolt handle and let it fly. You won’t do this quietly within range of game. Unlike many self-loaders though, the action can be worked slowly, and reasonably quietly, during the initial charging and the bolt pushed closed over a live round. The Vepr’s bolt is easy to work, and if you’re careful, you can do it more quietly than applying the safety. The big, long safety is pure Kalashnikov, and very noisy on and off. I can disengage the safety quietly though, by moving it slowly and carefully. It takes practice, and I wonder if I’d be able to do so with a buck in the scope.
Like its cousins, there is no bolt hold open. A chamber flag of some sort should go into your range kit for public ranges. With the safety applied, you can still pull back the bolt far enough, and quietly enough, for a chamber check.
The trigger is pure military, too. During the squeeze, initial travel is light and gritty, then stops. A little heavier pressure and a little more travel occur before let off. It is surprisingly manageable—once you get used to it. While both TAPCO and Jard make replacement triggers, I got the hang of it after shooting it a bit. The pull-weight of this factory trigger is between 5.5 and just over 6 pounds, although it feels lighter. Molot recommends the Vepr never be dry fired, by the way. Oops.
The system for mounting the scope is simple and time tested. Like its military predecessors, the Vepr comes with the siderail riveted to the left side for a quick-detachable mount. The American-made Arsenal SM-13 scope mount (used here) features a long Picatinny rail centering the scope over the receiver. The mount slides on the rail and its lever rotates 180 degrees to lock. Molot offers other mounts with integral 1-inch or 30mm rings.
The SM-13 mount sits low over the dust cover, and centers the scope over the boreline. The mount had a little play out of the box, but has an ingenious slack adjusting system easily manipulated by fingers alone. The instructions were clear, and one turn tightened up the scope mount rock steady. The adjusting nut has six slots that lock into a corresponding tooth in the base, so it is captured and won’t loosen.
The base sits low over the receiver cover, and Leupold medium PRW rings were too low. With high rings unavailable, I went with the AR Riser mount. The scope is a touch higher than I like, but everything now functions. The recoil pad works well and its face is nicely decorated as befits a sporting arm. Raising this lever allows the gas tube to be removed. The front sight is a round post sitting between protective ears. Elevation is fine-tuned by turning it in or out with the provided key.
There are several military-style scopes and mounts for these AK variants. Beginning with the 1960s-era Dragunov, the scope sits left of the bore-line so the soldier could access the iron sights. This means your shots cross the sighting plane as range increases (more important to a soldier than a hunter). These Soviet-era-style scopes and mounts abound. Adding to the confusion, Soviet mounts are of different heights for AKs and Dragunovs or SVDs, so be aware if you go there. They look cool, are inexpensive, and the windage correction is mostly unimportant for a hunting rifle unlikely to be used to shoot over 200 yards.
Speaking of iron sights, the military-style ones provided are fully adjustable (not surprising, since the RPK has similar ones). The sight picture is similar to, but finer than the Patridge-style of a handgun. The rear sight appears to be Parkerized grey, and is windage and elevation adjustable. Windage is adjusted by a locking dial on the right side. Pulling out the dial and turning it adjusts the windage. Each graduation marked on the sight equals one full turn of the dial, and the dial locks at 1/2-turn intervals. The tangent-style military sight is graduated out to 1,000 meters. Pressing a button allows the slider to move for elevation, and locks in place at 100 meter intervals.
The wing-protected round-post front sight is pure AK, and can be turned in or out to fine-tune the elevation. Along with the rifle comes a buttstock cleaning kit in a metal tube. While the stock has no port to accept the kit, inside are some useful tools, including a screwdriver/front sight key. The container for these parts has a slot in its middle you slip over the front sight adjusting key creating a T-handle for leverage. Nifty.
Oddly, when shooting with the irons, the wings of the front sight peak above the rear sight plain like a little devil’s horns. Surprisingly, they are an aid in maintaining a correct sight picture. The stock is walnut, and the normally square AK receiver has been given an angle cut to accommodate the sporting-style thumbhole stock. It is well executed and comfortable to mount. I was surprised the length-of-pull measured 14 inches. It snaps to my shoulder more easily than a 14-inch LOP normally would.
In carrying, the balance point is right around the chamber area of the rifle where the magazine and bolt handle are. The magazine pushes your hand far enough forward the bolt doesn’t stick into your palm. It is not uncomfortable to carry with one hand, although in my left hand, the bolt snagged my trouser pocket once in a while. The magazine is entirely made from synthetic material.
The Vepr comes with two, 5-shot single-stack magazines. The mags feed the rounds straight into the chamber. The gun ran flawlessly throughout the test when the mags were loaded with 5 rounds. Molot clipped the receiver at an angle, which moves the pistol grip forward for a comfortable hold, with a subtle palm swell. The checkering aids in a firm grip. The Molot factory logo (below) is impressed in the cheekpiece.
One item difficult to rectify was the narrow European sporting sling swivels. Few slings in America fit the narrow 7/8-inch swivels. In addition to being narrower than the 1-inch American standard, the swivel mounting screw sits high within the loop. This precluded use of slings with nylon QD attachments (which would have needed a trim to fit anyway). I found I could thread the simple 1-inch nylon strap of the inexpensive Hunter MagnaSoft sling through the swivels. If you buy a Vepr for hunting, spend a little more time in the gun shop looking for a suitable sling. The use of an Uncle Mike’s stud would’ve been preferable, since it gives you a choice of swivel widths.
I find the gun slings easily from the right or left side. Slung on the left side, the bolt is high enough on the receiver it doesn’t dig into my side as I walk. The Hunter padded sling was quite “springy” and comfortable.
The rear sight is fully adjustable for windage and elevation. Windage is adjusted by pulling out the knurled wheel and turning it. Elevation is adjusted by moving a spring-locked slider marked in 100-meter increments. Note the small lever at the front of the sight base.
The scope sits atop a Leupold AR riser on the Arsenal mount. Slide the mount on the rail and throw the lever forward to lock it firmly in place.
East meets West in pursuit of game. The Molot Vepr in 7.62x54R is a capable hunting rifle especially topped with a Leupold 3-9X in Arsenal mounts shooting today’s ammunition, like Graf & Sons loaded by Hornady with the firm’s 150-grain SST. Keeping warm is a snap wearing a Russian Federation officer’s ushanka atop a Woolrich “Pennsylvania Tuxedo.” Why not go all the way? A 7.62×25 Tokarev makes a dandy small-game and dispatching pistol in a reproduction
WWII rig from World War Supply. A Tom Farrell custom knife adds a touch of class to round out the East/West accouterments.
Ammo & Shooting
I chose to stick with quality hunting ammunition, since the Vepr is a hunting rifle. None of the choices were big bucks, and hunting loads from Prvi Partisan, Sellier & Beloit and ammo loaded for Graf & Sons by Hornady, and Hornady Steel were chosen. Most of the ammunition I typically see in the stores are Wolf and Tula steel-cased. Looking for a wider selection, Graf’s was the natural place, since they stock most of the majors. And all were in stock.
It was in the high 30s at the range, and a quirky thing started the day while fussing with the sights at the 25-yard line. Loading two rounds caused the bolt to close over the rounds without picking one up. The magazines were difficult to insert into the gun. In exasperation, I loaded 5 rounds and the behavior instantly changed. The magazines now seated smoothly, and the rounds fed and extracted perfectly. No other malfunction ever occurred during the rest of the test. Maybe my fingers and dexterity were affected by cold.
On Day 1, the trigger took some getting used to. Eventually, I found a technique of tugging through the gritty 1st stage, pausing at the 2nd, then squeezing smoothly through to achieve some pretty decent groups. I could see the bullet hits on the bright white of the Mountain Plains targets through the scope and able to see the 5-shot groups enlarge after three were in. Two of the best 5-shot groups were with Prvi Partisan and Winchester USA. The PP load was three shots into 1-1/2, four into 2-1/2 and the fifth took it all out to 4-1/4. With the scope removed, the last group of the day was shot with Winchester USA and was a 5-shot 100-yard group of 2-1/2 inches, with the best three in 1-3/8 inch.
Day one’s best 3-shot group came from the Sellier & Bellot 180-grain load at 1-5/16, and it was the most comfortable round to shoot. It also shot much higher than the 150s, and the rifle would need to be re-zeroed for both windage and elevation. All the 150-grain loads recoiled a little snappier, but none uncomfortably.
Ejection with all loads was brisk and fairly unpredictable, landing in a wide arc about 30 feet starboard and aft. Many of the cases received bad neck dents and most have body dents, but nothing to preclude reloading. The rangemaster erected a brass net after seeing their wicked trajectory, and the worst neck damage occurred when the cases hit the concrete. Netted, the cases had some body dents, but little neck damage.
On Day 2 I started with a freshly cleaned barrel and shot the iron sights first. My very first 5-shot, 100-yard group after firing one fouling shot into the berm was 1-3/8 inches with the Graf’s load. This time I goofed off with another gun between groups while this barrel cooled thoroughly. While I never bested that group, I got several 3-shot groups as good, with shots 4 and 5 taking the group out to the 2-1/2- or 3-inch range.
Putting on the scope, I never got as good a 5-shot group as my first iron-sight group of the day, but several 3-shot ones were as good from Graf’s, S&B and Prvi.
Even dirty, it certainly shoots well enough to make the resident deer population nervous, and the round delivers plenty of power in a comfortable shooting—if heavy—rifle.
The Vepr seems to shoot very good 3-shot 100-yard groups. All five here shot using the iron sights are within 2-1/2 inches, which is pretty good for barrel sights. Three of the Winchester USA 180-grain FMJ loads are in 1-3/8 inch.
From a freshly cleaned barrel, the Vepr delivered this outstanding iron-sight, 5-shot group of 1-3/8 inches at 100 yards with Graf’s (above). With the barrel dirty and the scope mounted (below), 3-shot groups were within 1-3/8 inches, but 5-shot groups grew into the 2-1/8- (Graf’s) to 2-7/8-inch (S&B) range.
Five loads tested included (left to right) Graf & Sons 150-grain Hornady SST, Prvi Partisan 150-grain Softpoint, Sellier & Bellot 180-grain Softpoint,
Winchester 180-grain FMJ, and Hornady Steel-case 150-grain SST.
Do you own a Vepr? Are you going to get one before they are sold out? Share your answers in the comment section.
Sign up for K-Var’s weekly newsletter and discounts here.
Comment
Gotta admit, I’ve always had a soft spot for AK’s. Maybe it’s their rep for being in all the nasty places in the world. Wouldn’t mind at all taking one hunting…..
I like mine. Accurate, has not jammed. Wish magazine was larger than 10.